How to Make Rice in the Pressure Cooker

Directions

In a fine wire mesh colander, rinse the rice under cold running water for about 30 seconds, until the water is less cloudy . Drain off the excess water for a minute or so, until water is no longer dripping from the colander.

If you’re using brown rice, you can skip this rinsing step.

Add the rice to the pressure cooker, along with the 2 cups of water and salt. Swivel the inner pot in the housing a little bit so that the rice settles into an even layer in the pot. Secure the lid with the release valve in its “Sealing” position.

If using white rice, select the “Rice” cooking program on its low pressure setting. The pressure cooker will adjust the cooking time automatically. For manual instructions, set the cooking time for 15 minutes on low pressure. If using brown rice, select the “Multigrain,” “Pressure Cook,” or “Manual” setting and set the cooking time for 20 minutes at high pressure for chewy, separate grains of rice. For slightly softer rice, increase the cooking time to 22 minutes.

When the cooking program ends, let the pressure release naturally for 10 minutes, then move the pressure release valve to its “Venting” position to release the remaining steam. Open the pot, fluff the rice with a fork, and serve. .